Dodge WIN Module Bypass: The Procedures and True Facts

Are you having trouble figuring out how to Dodge win module bypass? There are different ways to get the expected result without spending a lot of money.

Below, we provide all the necessary information to allow users to implement a definitive solution.

It is not always necessary to replace this module or hire an experienced workforce, and a few tools and the steps mentioned below will be more than enough.

Dodge WIN Module Bypass: How to Do

Different Dodge models include a unique system to start the vehicle. However, some users may encounter some inconveniences when starting the vehicle.

Exactly this happens when the vehicle does not start. That is why we have developed the following procedure to start the vehicle anyway.

Step 1: Finding the junction box

To start with this procedure, it is advisable to have some wires and a switch that will be useful when starting the vehicle.

Only a button allows you to start the vehicle without repairing the WIN module. Finding the junction box is the first step, and, in most vehicles, it is in the same place.

When it comes to a Dodge, the junction box is usually located on the vehicle’s hood.

On different models of this manufacturer, the junction box may be located under the hood, at the front, and on the vehicle’s left side.

This set of parts is straightforward to find because it is an essential box due to many connections.

Step 2: Locating the correct fuse

Once the user has found the junction box or fuse box, he must find the correct relay to perform this procedure efficiently. This is the second relay counting the oversized fuses from right to left.

Finding the correct relay can also be very simple by checking the vehicle owner’s manual.

The vehicle owner’s manual allows you to understand the operation or meaning of each of the fuses in the fuse box. Finding the correct relay is one of the most critical steps.

Disconnecting a faulty relay can mean losing some type of function or rendering the vehicle inoperable for some reason.

Once the user finds the correct relay, it is the starter relay. In this case, the user only needs to disconnect the starter relay to continue with the procedure.

Of course, this step must be done with care to avoid causing any damage to the starter relay. Damage to the starter relay could prevent or hinder the vehicle’s ignition.

Step 3: Adding a red wire

There are several ways to proceed with this procedure. However, not all procedures are recommended as some may cause damage or mechanical failure over time.

Some users incorporate a wire from the starter relay to the ignition switch, which is not recommended as it can generate too much heat.

One of the safest and most reliable methods is incorporating a wire into the relay used for the vehicle’s cigarette lighter.

This is a suitable option because the wire incorporated in this location will only draw power when the key is positioned. In turn, the cigarette lighter relay can be installed elsewhere.

In this way, the new wire attached to the fuse terminal of the cigarette lighter can always have the power to start the vehicle.

In turn, this same red wire must be routed to the button built into the driver’s cab. This is usually a button installed just below the WIN module where the key is inserted.

Step 4: Installing the black wire

A second wire must be checked to complete the procedure and have a functional button that can start the vehicle.

This wire is connected to the same place where the vehicle’s starter relay is installed. In this way, the user will complete the circuit necessary to have a functional start button.

Step 5: Starting the vehicle

Once the red and black wires have completed the circuit between the starter relay and the switch built into the driver’s cab, the vehicle should be ready to run.

So, it is necessary to insert the key in the same place, as usual, to use the switch and start the vehicle’s engine.

To avoid all kinds of errors and possible mechanical failures, it is necessary to have the owner’s manual.

This allows us to detect which is the correct relay to work within this procedure. In case of not having the correct information about the fuse box, it is recommended to count on experienced labor.

Dodge Ram WIN Module

Among the essential parts of a vehicle is the wireless ignition module or node. In this case, it is always a set of essential parts for the vehicle’s operation.

This set of parts decreases the probability of suffering a crash due to an automatic engine shutdown.

In this case, a module can be damaged, producing different inconveniences for the driver. When this module is damaged, the user could be turning the key and not start the vehicle.

It is also possible to notice a worrying temperature increase when this module is not working correctly.

Just as there is the wireless ignition node, there are also other modules that Dodge chooses to implement to control other functions.

The most important is the wireless control module that provides the proper communication between the presence sensors and the luminaires through a mesh network.

All these models have a specific life span and the wireless ignition node.

So, if the vehicle owner detects vibrations or shaking in the vehicle when using the accelerator, this is a clear indication of failure.

That is why the following replacement procedure can be beneficial.

Dodge Ram WIN Module Replacement

When the wireless ignition node of a vehicle deteriorates for some reason, it is necessary to replace the entire module as it is difficult to repair it.

This happens because different problems can occur when this module is deteriorated and provides a malfunctioning line.

Checking the condition of the module

One of the first steps that are important to consider is detecting possible symptoms of a malfunction of this module. A wireless power node in poor condition can present different inconveniences.

One of the most straightforward problems people encounter is the impossibility of starting a vehicle.

It is also possible to encounter other problems in the vehicle, such as difficulties during acceleration or a continuous vehicle alert.

As is often the case with other vehicle parts, this model has a certain lifespan that decreases over the years.

Before purchasing the wireless ignition node module kit, it is necessary to read the owner’s manual to check compatibility.

Different Dodge models may vary in their design of different parts. So, buying the wrong or incompatible module may be enough to waste your money.

Remove the old module

Removing the old module that needs to be replaced is a simple step and requires a few tools. The wireless ignition module is where the vehicle’s ignition key is inserted.

So, it is necessary to remove the entire plastic panel under the vehicle’s steering wheel.

You only need a few screwdrivers and a torque wrench to do this. Removing the plastic panel only takes a few minutes. In this case, the user may encounter different screws on the panel.

It is also necessary to remove the screws holding the wireless ignition node module to the metal part of the vehicle.

Adding the new module

Adding the new wireless ignition node module is as easy as removing the old module. The user must remember to insert the connectors to the new module.

Otherwise, this module will not be able to start the vehicle. Once the new module is screwed into place, the user can start the vehicle and notice the difference in operation.

FAQs for the Dodge WIN Module Bypass

Do I need to know to program for a new WIN module?

Any user who needs to incorporate a new wireless ignition module does not need to know anything about programming.

However, on certain occasions, the vehicle keys should be reprogrammed. To do this, the user must have all the keys when replacing the new wireless ignition node module.

This is the same as the wireless control module as the original keys or security pin code is required.

However, the original keys are usually kept intact despite the addition of new wireless control modules that are upgraded.

It is advisable to have the appropriate knowledge or an expert to program the vehicle keys.

What does the wireless ignition node module do?

A vehicle has a wide variety of modules responsible for controlling the operation of different parts of the vehicle.

The wireless ignition node module is a set of parts that allows users to operate and start their vehicle, and it is one of the essential parts of starting the vehicle.

That is why sometimes this module can be damaged, harming the driver. Some users can perform a different procedure instead of replacing this module.

This can happen because replacing this part can be a bit costly due to the large number of electronic parts it contains.

What are the symptoms of a damaged module?

Several symptoms can be considered to detect a malfunctioning wireless ignition node module.

Detecting any following symptoms early can prevent further mechanical damage or even traffic accidents.

One of the most common problems encountered with this damaged module is various malfunctions during acceleration.

Anyone could press the accelerator pedal and notice jerks, vibrations, or tremors in different parts of the vehicle. Increasing speed could aggravate these situations, although lack of power and hesitation can also occur.

Another situation that can occur with a damaged wireless ignition node module is an excessive increase in temperature.

Simply put, when this module functions improperly, it produces too much of a temperature in the surrounding areas where it is located.

This should be considered as the temperature is detrimental to the vehicle.

Finally, it is essential to consider the most common problems that can appear as a lack of power.

A wireless ignition module that does not work could be due to a lack of power or a bad connection. Of course, the lack of power is more than enough for the engine not to start despite turning.

Is the wireless control module the same as the WIN module?

As mentioned above, the wireless ignition node may not be the same as the wireless control module.

Specifically, the wireless control module is based on parts that control the input function without the need for the key. In this case, the user can use the remote control and the keys.

For this purpose, he does not need to insert the key into the vehicle, as the remote control is more than sufficient.

In particular, the remote operation of this module makes it possible to open the trunk lid, lock or unlock all doors, and provide a warning to others about the vehicle.

On the other hand, the wireless ignition node module is related to the engine ignition.

How to check the operation of the ignition module?

Sometimes it is necessary to check the ignition module to detect possible faults. A wide variety of problems can occur when starting or accelerating a vehicle with a faulty ignition module.

To test this module, it is necessary to have a 12-volt test light ground wire.

This instrument should be connected to the negative terminal located on the ignition coil. It is also essential to have another person starting the vehicle at different times.

When this happens, the test light on the tool should flash. No further testing will be necessary because the module is functioning correctly.


Any user will be able to use their vehicle by knowing how to Dodge win module bypass. As we have seen above, this is a simple procedure that can be done quickly.

It is advisable to have the owner’s manual and know the fuse box properly.

If you do not know the fuse box properly, we recommend calling in an experienced technician.

Disconnecting the wrong fuse could cause the shutdown of different functions necessary for the vehicle’s operation.

Leave a Comment