Honda Accord Check Engine Light Reset: How to Do It?

What is the easiest procedure for the Honda Accord check engine light reset, is a common question query. There are tons of worthless guidelines, just wasting your valuable time.

Here we have shared the simplest and easiest way to solve this issue. However, when the check engine light stays turned on, it can be rather frightening.

That tiny light on the vehicle’s dashboard suddenly illuminates, which might raise concerns in the user’s mind. It isn’t anything that should force them to shut the light down in terror immediately.

DTC or the “diagnostic trouble codes” is a phrase that is simply another name for “check engine light” codes.

The OBD (on-board computer diagnostic system) or the ECM in the Accord stores these automotive computer codes. The check engine light could indicate any of hundreds of different codes.

While this may appear intimidating, addressing the basic diagnostics will provide the user with vital information about their car and allow the Check Engine Light to do what it was designed to do: offer guidance.

Unfortunately, an illuminated Check Engine Light is not usually accompanied by clear and helpful car symptoms.

Because there are so many different OBD codes, there are also so many various reasons for the light.

Honda Accord Check Engine Light Reset: Step by Step Process

A check engine light might come on for various causes, like not properly tightening the gasoline cap or driving during the cold seasons.

That is to say, a car may be in perfect working order, but that doesn’t imply the annoying engine light will go away very soon.

While one should always check with a professional repair shop to ensure that there isn’t an issue with the engine.

If a user is convinced that the loose fuel cap is causing the check engine light to stay on, they should take these steps to reset it.

Step 1: Drive the car and wait till the light gets switched off automatically:

Driving and time are the first and most straightforward methods for turning off the check engine light.

Most onboard computers will perform various checks to determine the reasons for the check engine light to illuminate. Carry on driving as usual in the vehicle.

If one finds that the check engine stays illuminated for three days or more, the issue might not have been resolved yet, and one might need to use one of the ways listed below for resetting it.

Step 2: Turning the vehicle on and then off 3 times

After turning the car to the ‘ON’ position and then turning ‘OFF’ 3 times in a row, certain cars will fix the error codes automatically that generated the first issue.

A user should put the key inside the ignition, start the car for a second, and then switch it off for a second.

After two more repetitions, they should drive the automobile usually. Also, it’s necessary to check whether the light (check engine) has been successfully reset/restored.

Step 3: Disconnecting the battery and reconnecting it:

A wrench will be required. Prop the hood open and separate the positive power cable from the vehicle battery with the wrench. Disconnect the battery for fifteen minutes at least.

Then put the key into the ignition three times to start the car and keep it in the “Turned-On” position.

As a result, this clears the emissions data and the readiness flag data from the vehicle memory.

Step 4: Delete the error codes

Proceed to remove the logged check engine codes using the code reader’s user interface. There should not be any error codes displayed once it’s finished. At this moment, one can shut down the engine.

Step 5: An OBD Code Reader is a good option

An onboard diagnostic or an OBD reader and a wrench are required. These low-cost readers decode and clear engine codes.

To use this approach, follow these steps:

  1. Connect the reader to the vehicle’s OBD port. This port is usually found directly above the footwell on the bottom of the dash. To reach this port on some automobiles, one will need to remove the fuse box door.
  2. To switch on the reader, press the “enter” button once connected.
  3. The gadget will run a scan on the engine to see any fault codes. The reader will reveal any error codes it discovers after it has finished analyzing. If a user wants to double-check the codes (if any), they should make a note of them online or in the code reader’s handbook.
  4. Now, hit the “scroll” button to locate the “erase code” option. To remove the fault code and do a Honda Accord check engine light reset, press enters while on this option.

Step 6: Run a few miles

It’s ideal that a user drives their vehicle about thirty to one hundred miles to make sure that the check engine light doesn’t appear again.

This is because the readjustment of the different sensors will need time which will allow the “Drive Cycle” of the vehicle to reset.

The light (check engine sign) must stay turned off, and the “drive cycle” must be registered-“ready” if a user wishes to take an emissions test.

Drive cycle readiness is usually achieved after 50-100 miles of driving; however, it’s essential to check the individual vehicle application with the mechanic or dealership.

Honda Accord Check Engine Light: What & How does it Work?

When the engine light is turned on, the car’s computer stores one or more diagnostic fault codes. Even if you find that the lights are off, the codes will remain.

The car owner and the mechanic can use an OBD-II scanner to extract the codes and then diagnose the problem to determine the source of the check engine light.

If the light stays on, though, it usually implies the car’s emissions control system is malfunctioning, and it’s polluting the air beyond federally allowed limits.

An inspection of the emissions or smog check in a car would be a failure in this situation.

One should not confuse the check engine light with the service light or the light for maintenance. When a time comes for a routine service, these lights glow.

Likewise, gallons of fuel used, mileage, or any other form of vehicle-use measurement frequently triggers them.

Types of Engine Light

Various issues can result in such a light (check engine signal) turning on, but a few of them are more prevalent than others. The following are a few possible causes:

  • The light turns on in some instances and flickers-This might happen due to different driving conditions. If a user notices that a vehicle is behaving differently when the light is turned on, it’s advised to take the car to the mechanic soon.
  • The light turns and stays on-This means there is an issue in the car’s emission system.   
  • The light is on, and there is performance issues-There is a significant problem in the cars’ engine management system or the emission control.
  • The light is on and blinks all the way steadily while driving-This is also a big problem indicating that there might be issues with the catalytic converter. It might overheat and cause fire on the vehicles’ underside. Stop immediately in such case look for repair in the nearby auto station.

How to Turn Off Check Engine Light Honda Accord

Of course, before resetting the Check Engine light, one should inspect it for any faults. A car’s Check Engine light is crucial for detecting problems before they become severe or deadly.

If the problem is detected and diagnosed, the check light should turn off on its own; however, if it’s still on, one should try the following steps to see if the issue is resolved:

Step 1: Turning the engine off and let it cool

It might so happen that because the engine was on and it’s heated, the light still glows even after the check light issue is addressed.

As a result, it’s better to shut down the engine and let it cool down so that the lights automatically turn off.  It’s an age-old trick that might work.

Step 2: For many seconds, press and hold the brake pedal

Doing so will turn on the taillights and will drain any leftover power from the system. As a result, it will automatically turn off.

Step 3: Find the battery terminals, tighten them using a wrench

Locate the negative terminal on the automobile battery while wearing safety gloves and glasses.

A negative (–)/black cap sign is usually present. The positive cap will be red with a positive (+) symbol on it.

With a wrench, the nut on the negative terminal should be loosened. Remove the battery’s negative connector. For 30–60 seconds, keep it to the side.

With the wrench, connect the negative cable again and tighten it.

Step 4: Wait till the vehicle computer restarts

Allow at least five minutes for the computer to restart completely. Change the battery cable by reversing the procedure. Remove the cardboard from the situation.

Step 5: Restart the engine again

Turn the engine on again. The engine light will be turned off now.

Unfortunately, if it switches back on, the initial issue has not been repaired, prompting the computer to display the error code once more.

Blinking Check Engine Light Honda Accord: Behind the Scene

Here are the reasons why the check engine light might blink:

1. Problems with the engine

Engine troubles, of course, might be the reason for the light to turn on. A control module uses a variety of sensors to monitor the performance of the engines.

When it senses a problem, the check engine light illuminates.

2. Problems with transmission

The car’s transmission controls engine power and it gets distributed to the driving wheels.

Because both these assemblies arse so tightly linked, a transmission malfunction can result in increased tailpipe emissions.

As a result, if the control module senses a transmission malfunction, the check engine light will illuminate/blink.

3. Problems with emissions equipment

There is a multitude of emissions equipment onboard modern vehicles. The exhaust gas recirculation system, catalytic converter, and evaporative emissions system are just a few examples.

Each puzzle piece is engineered to reduce exhaust emissions, conserving the environment.

4. Problems with sensors and modules

A variety of sensors and modules controls today’s powertrains. The modules also connect via an extensive data network.

The illuminated check engine light may be due to issues with sensors, modules, networks, and wiring.

5. Problems with air/fuel delivery

To work effectively, a car’s engine needs the proper amount of air and fuel. The control module will most likely notice whether there is a lot of or too lesser control or either one of them.

After that, the device illuminates the check engine light.

6. Problems with the ignition system

An ignition system contains the spark plugs, coil packs, and all other components required to ignite the engine’s air/fuel mixture.

The control module, as one might expect, keeps an eye on the ignition system’s performance. If it identifies an issue, it will illuminate the check engine light.

Most Important FAQs about Honda Accord Check Engine Light Reset

What causes my check engine light to flash on and then off?

This might be due to several reasons.

A malfunctioning gas cap, failing engine sensors, damaged spark plugs, faulty valves in the exhaust gas recirculation or the EGR system, or occasional misfiring are all possible causes.

In this instance, it’s usually better to take the automobile to a professional for a diagnostic or, at the very least, utilize an OBD reader.

Following a repair, will the check engine light automatically go away?

Sometimes the answer is yes, and other times it is no. If the problem has been resolved and the computer has been cleared using a code reader or a scan tool, the light show should quickly disappear.

However, this isn’t always the case, and the light may remain on (or switch on and off sporadically) if there is a major electrical or wiring issue.

If the automobile was serviced by a mechanic in an auto shop and the problem appears to be resolved.

However, the light still stays illuminated, a user should return it to the auto shop and make sure to reset the light by the mechanic.

Is there a gadget required to turn off my check engine light?

Yes, an OBD code reader will be needed if a user wants to switch off the check engine light manually. It connects to the diagnostic port found under the dashboard in cars built after 1996.

These gadgets are available at a variety of automobile parts stores and internet merchants such as Amazon.

However, if an OBD reader is used to clear the code but the problem remains, the check engine light will most likely come back on soon after.

Final Thought

Until an expert diagnoses the car, one won’t know what the check engine light indicates.

Such an alert could suggest something minor and innocuous – or something more significant that could further result in damaging the car.

So even after the Honda Accord check engine light reset steps have been taken, and the light is still on, there might be serious issues.

A user must not take any risks. If the light still comes on, have it diagnosed and repaired as soon as possible.

Leave a Comment