How to Pull a Gooseneck Trailer with a Bumper Hitch: 06 Step Method

When considering how to pull a gooseneck trailer with a bumper hitch, know that the gooseneck is not the same as any other type of trailer.

In comparison to other trailers, goosenecks are more stable, as the weight of the vehicle is distributed over the rear axle of the vehicle.

Therefore, there is less chance of the trailer swaying at very high speeds, and it has a very high weight limit.

It is also possible to turn a gooseneck trailer hitch more tightly than other trailer types. Gooseneck trailers are without a doubt the most powerful enclosed trailers available.

They are designed for the most heavy-duty loads, and they can transport heavy loads between points A and B safely and securely.

How to Pull a Gooseneck Trailer with a Bumper Hitch: the Simplest Way

When you want to pull a gooseneck trailer with a bumper hitch, it is typically recommended to not exceed the tow rating of your truck or gooseneck hitch system.

Gooseneck trailers tend to carry heavier loads than receiver hitch trailers.

But you must always ensure the total trailer weight which includes empty trailer weight plus cargo weight does not exceed the tow rating of your truck or the bumper hitch system.

Ensure that you follow the state’s regulations if you want to tow. During the towing process, be aware that towing regulations vary.

Therefore, make sure you know the state laws and that of any state you want to visit also.

Here is what you will do before you can successfully pull a gooseneck trailer with a bumper hitch

Step 1: Evenly distribute the load

It is important to evenly distribute the load on the trailer, front to back. Ensure the tire pressure on the truck and trailer should be within the manufacturer’s recommended range.

Step 2: Lock trailer securely

If you want the trailer to lock down securely, it should be seated on the bumper hitch ball securely.

Bumper hitch balls work with certain trailer sizes, usually 2 5/16″, however, heavy-duty trailers require 3″.

Note that the trailer won’t seat properly if the ball is too big, and the coupler will not securely lockdown if the ball is too small, increasing the risk of your trailer popping off the ball.

Make sure the bumper hitch system and your trailer should be compatible. Attach your trailer safety chains to the safety chain attachment points on bumper hitch systems.

Using the integrated trailer plug, connect the trailer light harness and test all the trailer lights, which includes the backup, brake lights, tail lamps, and turn signals.

Step 3: Check and adjust trailer brake system

Once the lights have been checked, the trailer brakes need to be checked as well. Certain trucks come with integrated trailer brake controllers, others feature external controllers you can purchase.

When hooking your gooseneck trailers, adjust the brakes accordingly.

The trailer’s driver should set the brakes to use less force rather than more force when towing a heavy load so that the trailer’s tires won’t skid up from locking.

Step 4: Adjust tongue weight properly and secure load

For a trailer to tow straight and stay stable, a reasonable amount of downward pressure has to be applied on the hitch ball.

The key factor isn’t the actual weight of the trailer, but what it represents: which is the trailer’s center of mass found ahead of its axle.

How then does the tongue weight affect the truck’s handling and stability? Large loads can be hauled with gooseneck trailer hitches.

The tongue weight of your loaded trailer should never exceed 25% of its weight as the average tongue weight is 15% of the trailer’s weight.

To minimize the chances of your cargo shifting during transport, secure heavy loads with straps or chains rated for holding heavy equipment.

Your side mirrors should be wide enough to let you see the trailer tires without adjusting your position on the driver’s seat.

Now after loading your trailer, you can adjust the tongue weight to ensure easy movement when you’re on the road. How do you adjust tongue weight?

The trailer tongue weight is set by placing heavier items over the axle but not closing the front.

Additionally, you will need to position heavy items as low as possible to the trailer deck and centre them left-to-right.

If you have loose items, fasten them down securely, especially the heavier ones, so they cannot move and change the tongue weight of the trailer.

Set your cargo such that 60% of its weight is on that trailer’s axle and the remaining 40% behind.

Step 5: Perform Equipment maintenance and Safety checks

Learning how to install, operate and maintain heavy-duty equipment is essential to safe towing.

Regardless of how familiar experienced trailer users are with many of these items, a pre-trip safety inspection is always going to be a good idea.

You can ensure your safety in a few minutes by doing this and reaping the rewards.

There are many safety and equipment maintenance measures you can take to ensure a safe trip. You would have to make extensive research to cover all areas and get accurate knowledge.

Step 6: Implement safe driving techniques

It is very common for your trailer to out-weigh your truck. The extra load behind the truck will affect the truck’s driving ability.

To tow your loads safely, you’ll need to upgrade your driving techniques to include techniques used for trailers.

You can make research on these techniques to avoid causing any serious damage on the road.

What is a Gooseneck Trailer?

Gooseneck trailers have long necks which extend over the tailgate and slide over the ball hitches on the bed of the truck.

Gooseneck trailers enable the towing vehicle to travel longer without becoming unstable. Thus, this is why they are often wider, longer, and heavier.

Furthermore, they are much stronger and can carry more than bumper pulls.

A truck should be used to tow a gooseneck trailer and it requires special equipment that isn’t typically found on a standard truck.

When hauling heavy equipment, gooseneck trailers are the preferred option because they centre the trailer’s weight on the truck’s rear axle instead of the bumper.

Gooseneck trailers don’t wobble or sway behind your towing vehicle as much as bumper pull trailers.

For long-distance journeys, a gooseneck trailer will give you the stability needed. You can bank on them.

Types of Gooseneck Trailer

On the market, there are different types of gooseneck trailers. Although they all have a gooseneck hitch attached to the towing vehicle’s rear axle, they differ in design and function.

Flatbeds, double drops and 10-ton tilts are among the most popular gooseneck trailer types. We also have the gooseneck stake trailer.

Gooseneck enclosed trailer and the gooseneck dump truck.

Gooseneck vs Bumper Pull: Face to Face Comparisons

While considering the best towing/pulling system to use for your load.

We suggest you go over the differences between a gooseneck and a bumper pull to know the one that best suits your needs and how to choose the right one for your need.

What’s the Main Difference?

Gooseneck trailers and bumper pull trailers differ primarily in how they attach to vehicles.

Usually, bumper pull trailers are attached to vehicles using a ball hitch on the rear bumper of a motorhome, truck or SUV.

Gooseneck trailers have long necks which extend beyond the tailgate and connect to a ball hitch on a truck bed.

Cost of Bumper Pull vs Gooseneck Trailer

Trailers with bumper pulls are usually lighter and smaller. As a result, bumper pulls are often less expensive than goosenecks.

The cost of a bumper pull trailer would play a huge role in deciding when it comes to choosing between trailers.

Size and Weight

Despite their long length, gooseneck trailers do not destabilize the towing vehicle. These trailers are usually wider and heavier than conventional trailers.

Nevertheless, their towing capabilities far exceed those of bumper pulls.

Trucks are required to tow gooseneck trailers, which require special equipment that isn’t standard on most trucks.

In some cases, you may be able to tow the bumper pull behind an SUV or an RV depending on the size of your bumper pull but this is not the case for Goosenecks.

Consequently, for those without a truck or who want a smaller trailer, bumper pulls are likely the best option. Choose a gooseneck trailer if you have a truck and plan to pull a lot of weight with it.

Towing Capacity

Generally, bumper pull trailers have a smaller carrying capacity than gooseneck trailer. You should consider the trailer’s size and weight.

You may check out the gooseneck trailer if your load is more than an SUV can handle.

Stability

A gooseneck trailer offers more stability than a bumper pull because the weight of the trailer is centred on the rear axle rather than the rear bumper.

A gooseneck trailer will not wobble or sway behind your towing vehicle as much as bumper pull trailers.

If you need more stability and are travelling long distances, a gooseneck trailer is a good choice.

FAQs about How to Pull a Gooseneck Trailer with a Bumper Hitch

Can you pull a gooseneck trailer with a bumper pull?

No!

Gooseneck trailers are designed so that they can carry more weight, and because of that, they require a special hitching system to be installed in your truck to be able to move the trailer easily.

What pulls better gooseneck or bumper pull?

Goosenecks are, on average, more stable than bumper pulls, as they place more weight on the vehicle’s rear axle rather than its behind.

Thus, the trailer will not sway as much at higher speeds, and the weight limit will be increased.

Can a bumper pull trailer be hotshot?

Hotshot truckers tend to use bumper pull trailers the most. Both commercial and civilian drivers use this type of trailer. The versatility of bumper pull trailers makes them very popular.

This trailer is easy to use, so you’ll love it if you get it. Gooseneck trailers are more expensive. In addition, you can drive this trailer without a Commercial Driver’s License.

Where do you put weight on gooseneck?

Placing 60% of the trailer’s weight forward on the front axle, evenly distributing it side-to-side, should be the first step in loading the trailer.

The cargo must be centred left-to-right and properly secured to prevent it from shifting during transportation.

What is needed to hook a gooseneck trailer?

To start with, you would require a ball that is mounted directly into the hitch in the bed of your truck. You also need a coupler which is attached to your trailer.

Make sure the couple is adjustable by height so that you can dial in a trailer to your truck to ensure that it’s on par with the truck.

You also need your safety chains and breakaway cable and electrical connection to get everything ready on the go

Do you need to use safety chains with your gooseneck trailer?

Gooseneck trailers must be equipped with safety chains. They are metal in nature. The chains are usually strong and thick and are used to connect the towing vehicle to the trailer.

Safety chains serve a very important purpose. These chains keep trailers safe, as you might guess since the name includes the word safety.

How do I purchase a gooseneck trailer?

The best way to purchase a trailer is to contact an authorized dealer close to you. If a problem arises with your trailer, you will have a local trailer specialist to assist you to solve your issues.

How much weight can the trailer haul?

It is generally calculated by subtracting the weight of the trailer (unloaded) from the GVWR (Gross Vehicle Weight Rating).

Verdict

When you want to purchase a trailer, you’ll want to determine the type of trailer you need before deciding what to purchase.

You should consider getting a gooseneck if you plan to transport several horses or livestock or heavy stuff.

The gooseneck trailer has its advantages. You will experience a more comfortable ride and optimize your trailering experience by choosing the right hitch.

Leave a Comment